Inductive Vehicle Loop Detector for Car Parking Barrier Loop Detectors/Vehicle Access Loop Sensor

Description 1. The pulse relay can be configured to activate vehicle detection or when the vehicle leaves the loop.
2. This feature determines the non-detection level at maximum sensitivity to avoid detecting vehicles such as large trucks.
3. The sensitivity can be changed using four sensitivity settings on the switch.
4. Four frequency configurations can be used to prevent signals from interfering with adjacent loops.
5. This relay is typically used to prevent false detection of small or fast-moving objects.

 

Specification:

When the detector is tuning, the green channel LED and the red power LED illuminate. This remains on for approximately 2 seconds, then the green LED turns off. If there is a loop fault, the channel LED illuminates and flashes to indicate a fault. If the fault is self-healing, the detector will continue to operate. The green channel LED also illuminates as soon as a vehicle is detected passing through the inductive loop. The red power LED on top of the unit will remain lit, indicating that the unit is powered on.
Features:
The pulse relay can be configured to activate vehicle detection or when the vehicle leaves the loop.
This feature determines the non-detection level at maximum sensitivity to avoid detecting vehicles such as large trucks.
The sensitivity can be changed using four sensitivity settings on the switch.
Four frequency configurations can be used to prevent signals from interfering with adjacent loops.
This relay is generally used to prevent false detection of small or fast-moving objects.
Specifications:
Condition: Brand New
Material: ABS
Color: Black
Reaction Time: 10 ms
Supply Voltage: 220 V
Power Consumption: 4.5 VA
Relay Output: 240 V/5 A
DC Voltage Tolerance: ±15%
AC Withstand Voltage: +10%/-15%
Operating Temperature: -20°C to +65°C
Storage Temperature: -40°C to +85°C
Frequency Range: 20 kHz to 170 kHz
Sensitivity: Adjustable in 4 increments
Signal Hold Time: Unlimited cycle/limited to 10 minutes continuously
Loop Inductance: Total loop plus connecting line is 50 Ω to 1000 Ω (ideally 100 Ω to 300 Ω).
Loop Connection Wiring: Maximum length 20 meters, twisted at least 20 times per meter.
Package List:
1 * Barrier Opener
1 * Connection Terminal
1 * Manual Instructions
Note:
1. The detector should be installed in a convenient, weatherproof position as close as possible to the loop.
2. The installation location should be chosen away from the heat source.
3. Other surrounding equipment should be at least 10mm away (it should not be firmly fixed to the wall).
4. Proper loop configuration and detector installation will ensure a successful inductive loop detection system.
5. Several important loop parameters include: cycle diagram, size, turns, and installation method.
6. Please note that the new and old types of this product will be sent randomly, and please ensure this is acceptable before ordering.