NATURAL OIL WOODSTAIN

INNOVATIVE AND DURABLE PROTECTION

1. Base and top coat in one finish
2. Fast drying
3. Natural wood grain remains visible
4. Extremely weather and UV resistant
5. Very water and dirt resistant
6. Resistant against algae, mould, mildew and fungal attack
7. Reduces wood swelling and shrinkage
8. Microporous, breathable finish which does not crack, peel or flake
9. No sanding necessary for future applications

10. APPLICATION TOOL

    Osmo Flat Brush or Microfibre Roller

    RECOMMENDED USE

    Exterior wood surfaces

    RECOAT

    One coat, when signs of wear become visible

    DRYING TIME

    First coat: 4-6 hours, Second coat: 12 hours

    CLEAN UP

    Osmo Brush Cleaner

    COVERAGE

    26m²/L with one coat

    SURFACE PREPARATION

    Wood surface must be clean, dry and frost-free (moisture content max. 20%).
    Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use.
    If possible, please apply the first coat to all sides before installation.
    Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
    The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
    If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

    METHOD OF APPLICATION

    With Osmo Flat Brush or Microfibre Roller, apply thinly along the wood grain and spread well.
    Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat.
    For renovation works, one coat applied to the clean and dry surface is usually sufficient.