PAINT STRIPPER

FOR WOOD AND METAL!

1. Powerful paint remover for the interior and exterior
2. Dissolves and removes synthetic resin varnishes and lacquers, oil coatings and dispersion paints

FINISHES

Clear

APPLICATION TOOL

Microfibre cloth

RECOMMENDED USE

Interior wood surfaces

COVERAGE

2-4m²/L

SURFACE PREPARATION

Always test on a small area first to determine performance, reaction time, substrate compatibility and material requirements! Cover and tape up any surfaces not to be treated, plastics (piping, wiring, windows etc.) as well as plants. Wear appropriate protective clothing and safety goggles when working.

METHOD OF APPLICATION

Stir well – do not thin. Apply generously and evenly with a brush or trowel and cover immediately with a thin foil (e.g. polythene dust sheets) and allow for sufficient reaction time (depending on project a few minutes/several hours/possibly overnight). Test stripping performance occasionally with a trowel. Always remove dissolved coating layer at the optimal time. Do not leave Osmo Paint Stripper on substrates for longer than necessary. Reaction time depends on the coating type, coating thickness and ambient temperature. Remove the soft dissolved layer with a trowel and rinse with water (if possible warm, approx. 40 °C). In some cases, it may be necessary to repeat the application.

NOTE

In indoor areas, always work with foils and ventilate well. Not suitable for highly crosslinked lacquers, such as 2-component DD coatings or epoxy resin coatings.