Enhance your wood surfaces with Ronseal 10 Year Woodstain in Deep Mahogany. This high-quality stain provides a rich, deep mahogany finish that is perfect for various wood projects, offering long-lasting protection for your windows and doors for an entire decade. It’s easy to apply without the need for a basecoat or primer, allowing you to paint straight away.
Technical specifications
Colour: Deep Mahogany
Size: 250ml
Drying Time: Rainproof in 1 hour, fully dry in 12 hours
Coverage: Up to 18m² per litre
Coat time: 4 hours between coats
Number of coats: 3
Finish: Satin
Durability: Lasts up to 10 years
Application: Brush
Base: Water-based
Sizes available: 0.25L, 0.75L, 2.5L
VOC: Low
Compatibility and accessories
Suitable for all smooth planed exterior wood surfaces
Not suitable for decking
Installation
Prepare the surface by sanding with 120 grit sandpaper to remove old finishes and smooth the surface
Clean the surface with white spirit and a cloth to remove dust and grease
Stir the product thoroughly before use
Test on a small area to check the colour
Apply with a brush in the direction of the wood grain
Allow 4 hours to dry between coats
Apply three coats for optimal protection and appearance
Lightly sand between coats for a smoother finish
Usage
Apply on dry, clean, and properly prepared wood surfaces
Wait at least 12 hours after the final coat before exposing to rain or moisture
Clean brushes and any accidental stains with warm, soapy water
For repairs, sand damaged areas and reapply the stain
Giving this 4 stars, not 5, purely because it comes out a different colour depending on the wood being painted. Originally bought it to paint our new fence but after one inconspicuous post it looked more dark brown than the grey we were expecting so we abandoned the job. Having bought 2 tins at over £35 a tin, we ended up using it on the decking and new shed instead. They look fabulous, however you wouldn’t think we’d used the same colour paint for both. Colour variations aside, the paint is a good consistency and easy to apply (we used a brush, not a spray). We bought 2 x 2.5 litre tins to do a fence that was 20m long by 2m high. Because of the absorbency of the rough, pressure treated timber, I’m not convinced 2 tins would’ve been enough for one coat on both sides of the fence. Can’t speak for long term durability as it’s only been on the decking a month but no peeling or flaking so far!
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}