1/5

T3 GT3582 GT35 type A/R 0 .63 0.7 Anti Surge Turbocharger anti surge housing

Name: T3 GT3582 GT35 type A/R 0 .63 0.7 Anti Surge Turbocharger anti surge housing
Brand: MAXPEEDINGRODS
SKU: GG260213B20
Price: 137.5 GBP
Availability: InStock

~~£193.00~~

Sold by maXpeedingrods GB

Product information

Description

General description

Perfect for all 4/6 cylinder engines with capacities ranging from 2.5L to 6.0L, the T3 GT3582 GT35 type A/R 0.63 0.7 Anti Surge Turbocharger is capable of boosting horsepower up to 600HP. This turbocharger features an anti-surge housing designed to enhance performance and reliability.

Technical specifications

Turbo Type: Individual

Turbine Side:

Exhaust Inlet Flange: T3 Flange

Exhaust Outlet Flange: 4-Bolt

Turbine Trim: 84.2

Turbine A/R: 0.63

Turbine Inducer Diameter: 68mm

Turbine Exducer Diameter: 62.4mm

Compressor Side:

Compressor Trim: 56.9

Compressor A/R: 0.7

Compressor Inducer Diameter: 61.5mm

Compressor Exducer Diameter: 81.5mm

Compressor Inlet Size (Air intake): 4 inch (103.5mm)

Compressor Outlet Size: 2.5 inch (63.6mm)

Bearing Type: Floating/Journal Bearing

Thrust Bearing: 270 degree

Cooling Type: Water + Oil Cooling

Maximum PSI: 22

Package Size: 26 x 25 x 23 cm

Package Weight: 8350g

Installation

Ensure there is enough space in your vehicle for installation.

Replace the air filter to prevent compressor wheel damage.

Replace engine oil to avoid damage from impurities.

Run the old turbocharger for 7-10 days before replacing it with the new one.

Ensure the oil drain line is lower than the turbo itself.

Gasoline cars must install a water cooling device to prevent overheating.

Ensure exhaust outlets are well sealed by welding.

Professional installation is highly recommended.

Usage

This turbocharger is not vehicle specific; please check specifications for compatibility.

Analyze and eliminate the cause of any previous turbo failure before installing the new turbocharger.

Other information

Product Material:

Turbine housing: Ductile iron QT450-10, temperature resistant up to 700°C

Steel turbine wheel: K418 alloy, high oxidation stability and resistance up to 900°C

Compressor housing: ZL104 aluminum

Compressor wheel/blades: Cast aluminum with good gas tightness and corrosion resistance

100% balancing test by TURBOTECHNICS VSR3

G3-min flow VNT turbo testing

Advanced actuator tester/programmer

Features

Brand
MAXPEEDINGRODS
Length
25 cm
Width
26 cm
Height
23 cm
Material
Metal

Visit the MAXPEEDINGRODS store

MaXpeedingRods fuels the passions of tuning enthusiasts worldwide. Since 2006, we have tirelessly researched and produced high-performance auto parts to make your dreams a reality. With a satisfied customer base of over 5 million, our commitment to excellent quality, easy installation, and superior service is unmatched. We are your gateway to transforming ordinary driving into an extraordinary experience. Our parts provide confidence for novices and pros to push their limits on the track or street. At MaXpeedingRods, your voice matters to us. Through collaborating with outstanding racers, we continuously integrate cutting-edge racing technology into our daily upgrades. This innovation delivers affordable access to optimal performance for more and more enthusiasts. Continuous innovation and upgrades are the foundation of our successful MaXpeedingRods product series. The calming comfort of our T6 series complements the junior track capabilities of the T7, while both suit for daily driving. Additionally, our Street Turbo series delivers exhilarating horsepower boosts. Today, we proudly serve a global community of passionate enthusiasts united by the thrill of tuning. Our vision remains unchanged - to open the gateway to tuning for all who share the same passion. The entrance is open, ready to speed up your dream.

You are here: