Temperature and humidity transmitter, high-precision wall sensor, analog 0-10V

Features:

1. STABLE AND SMALL: The sensor adopts a high-precision temperature and humidity measuring unit, offering long-term stability and a small size.
2. WIDE RANGE: Using a dedicated analog circuit, the operating range is wide, and it comes with a wide-range 10~30V power supply, making it very convenient.
3. WALL OR RAIL MOUNTING: The temperature and humidity transmitter is easy to install, supports wall or rail mounting, has high IP65 dust resistance, and is protected against rain and snow with good breathability.
4. Industrial-Grade Chips: The circuit adopts industrial-grade microprocessor chips and imported high-precision temperature and humidity sensors to ensure excellent reliability, high accuracy, and interchangeability.
5. CONNECTION TO VARIOUS EQUIPMENT: Adopting a standard industrial interface with 0~10V analog signal output, it can be connected to an on-site digital display, programmable logic controller (PLC), inverter, industrial control host, and other equipment. Safe and reliable, it has a beautiful appearance and is easy to install.

Specifications:

Item Type: Temperature and Humidity Transmitter
Product Size: Approx. 147 x 88 x 41 mm / 5.79 x 3.46 x 1.61 inches
Dustproof rating: IP65
Power supply: 10~30V DC wide voltage power input; for 0-10V output devices, only 24V can be used.
Output interface wiring: The standard configuration of the device is to have 2 independent analog outputs.
Material: ABS
Weight: 157 g / 5.5 oz (approx.)
Specific wiring:
Item Circuit Identification Description
Power VCC Positive Power
GND Negative Power / Negative Signal
Positive humidity signal
Parameter:
DC Power Supply (default) DC 24V
Maximum Power Consumption Output Current 1.2W
Output Voltage 1.2W
A Accuracy: Humidity ±2% RH (60% RH, 25°C)
Temperature ±0.4°C (25°C)
B Accuracy: Humidity ±3% RH (60% RH, 25°C)
Temperature ±0.5°C (25°C)
Temperature Range: -40°C~+120°C, default -40°C~+80°C
Transmitter operating temperature and humidity: -20°C to +60°C, 0% RH to 95% RH (non-condensing)
Probe operating temperature: -40°C to +120°C, default -40°C to +80°C. Operating humidity: 0% RH to 100% RH
Long-term stability: Humidity ≤ 1% RH/year
Temperature ≤ 0.1°C/year
Response time: Humidity ≤ 8 s (wind speed 1 m/s)
Temperature ≤ 25 s (wind speed 1 m/s)
Load Capacity Voltage Output Output Resistance ≤ 250 Ω
Current Output ≤ 600 Ω
Hole Size Approx. 70 mm / 2.76 inches
Parameters can be changed directly via the software settings or buttons. Product Selection:
RS - Other Standards
WS - Temperature and Humidity Transmitter Sensor
V10 - Voltage Output 0 ~ 10 V Common Problems and Solutions: No output or incorrect output Possible Causes:
1. Incorrect range corresponds to a PLC calculation error. For the range, please refer to the technical specifications in the first part.
2. The wiring method is incorrect or the wiring sequence is incorrect.
3. The supply voltage is incorrect. (24V supply for type 0-10V)
4.The distance between the transmitter and the collector is too long, causing signal interference.
5. The PLC acquisition port is damaged.
6. Hardware damage.

Package List:

2 x Screws

2 x Wall Plugs

1 x Transmitter

1 x User Manual

Note:

1. 24V power supply for 0-10V type. 2. The device does not provide a communication line by default; the line color is for reference only.