TPMS Learning System Tire Valve Activator for OPEL GM TPMS New Car Tire Pressure Monitor Sensor Tool

CHECK YOUR VEHICLE MODEL Please check your car model to see if it is compatible with EL-50448 in the last photos. The tire pressure monitoring sensor cannot be used for trucks. The TPMS tire pressure sensor on models from and after 2012 can only be read with certain diagnostic tools.

SIMPLE OPERATING STEPS The EL-50448 TPMS reset tool program makes resetting all tires much easier in just 3 steps: Step 1 - Activate the model; Step 2 - Read the information on the tire pressure sensor; Step 3 - Same method to read other tire pressure information;

ABOUT THE LEARNING MODE Ensure the vehicle is in TPMS learning mode and follow the maintenance procedure. Hold the tool against the tire sidewall near the valve stem. Press the learning button while holding the tool against the tire sidewall.

SIMPLE ACTIVATION The tire pressure monitoring sensor activation tool is simple, quick, and user-friendly, and activates the individual TPM sensor with the push of a button.

NOTES ON USE: Different vehicles may take different times to reinitialize all tire pressure sensors after a turn. The tire pressure monitoring sensor uses a NEW 9V battery. The charger and battery are not included. Remove the battery when not in use.

How to use:
1. Put the car into TPMS learning mode. (The car will honk twice.) 2. Start the relearning process from the front left tire and position the antenna correctly. Press and release the on/off switch. Once the speaker sounds, move to the next tire. 3. Follow this order to install the TPMS sensors: front left, front right, rear right, rear left. 4. Once all sensors are reset, the car will emit two beeps to indicate that the TPM has been relearned. Helpful Tips: 1. When using the EL50448, ensure the antenna is in the correct position. 2. Ensure the wing 9V is in good condition. 3. This works for light trucks, but not for heavy trucks.