TPMS19 TPMS Relearn Tool Compatible for Vehicle Tire Pressure Monitor Automotive Activation Tool

Description:

TPMS Tire Pressure Monitoring Sensor for Ford

Interchange Part Number: TPMS-19, 8C2Z-1A203-A

Replaces your old and damaged one.

Placement on Vehicle: Left, Right, Front, Rear.

Specification:

Size: Approx. 5cm*1cm*2.5cm

Battery:  not included

Supported models:

2007-2016 for Ford F-150

2008-2016 for Ford F-250 F-350 F-450 F-550 Super Duty

2007-2016 for Ford Mustang

2007-2014 for Ford Edge

2006-2016 for Ford Escape

2008-2016 for Ford Expedition

2006-2016 for Ford Explorer

2008-2015 for Ford

2008-2016 for Ford Taurus

2008-2016 for Ford E-150 E-250 E-350 E-450 Econoline

2008-2016 for Ford Fiesta

2008-2016 for Ford

2008-2016 for Ford

2008-2011 for Ford Crown Victoria

2011-2016 for Ford Transit Connect

2006-2011 for Ford Ranger

2007-2016 for MKX

2007-2016 for MKT

2008-2016 for MKZ

2008-2016 for MKS

2008-2016 for Navigator

2008-2011 for City Car

2007-2008 for Mark LT

2006-2010 for Mountaineer

2006-2010 for Monterey

2006-2011 for Marin

Package Includes:

1x Tire Pressure Monitoring Sensor for Ford

How to Train Ford Tire Pressure Monitor TPMS Sensors

1. Turn the ignition switch to the OFF position, then press and release the brake pedal.

2. Cycle the ignition switch from OFF to RUN 3 times, ending in RUN.

3. Press and release the brake pedal.

4. Turn the ignition switch to the OFF position.

5. Turn the ignition switch from OFF to RUN 3 times, ending in RUN.

*The horn will chirp once and the TPMS indicator will flash if the training mode was successfully entered.

If equipped, the message center will display TRAIN LF TIRE.*

6. Place the Tire Pressure Monitor Activation Tool on the sidewall of the LEFT FRONT (driver's side) tire, at the valve stem.

Press and release the test button on the TPMS tool repeatedly until the horn beeps.

(It may take up to 6 seconds for the tool to activate the sensor. Leave the tool on the sidewall for the full 6 seconds.)

The beep indicates that the body control module has recognized the TPMS sensor.

7. Within 2 minutes of the horn sounding confirming the LF tire has been programmed,

Place the TPMS tool on the sidewall of the RIGHT FRONT (passenger's side) tire at the valve stem and press the test button to activate the sensor.

8. Repeat step 7 for the RIGHT REAR tire followed by the LEFT REAR tire in that order. The procedure is complete once the last tire has been trained.

Once training is complete, the Message Center (if equipped) will display TIRE TRAINING COMPLETE.

For vehicles not equipped with a Message Center, the successful completion of the training procedure is verified by turning the key to the

OFF position without the horn sounding. If the horn beeps twice when the switch is turned OFF, the training procedure was not successful.

NOTE: If the vehicle or wheels/sensors have been stationary for more than 30 minutes, the sensors will go into “sleep mode” to conserve battery life. It is necessary to wake them up by simply moving them or rolling the tires before they are activated. will communicate with the vehicle.

NOTE: The TPMS training procedure must be performed on one vehicle at a time, in an area free of radio interference - at least 3 feet away from other vehicles equipped with TPMS sensors.

NOTE: Vehicles with different front and rear tire pressures, such as F-Series trucks and E-Series vans, also require TPMS retraining after a tire rotation. If the sensors are not trained, the TPMS warning light will illuminate on the dashboard.

Note: The data are all measured manually, please allow 1-3cm error due to differences in light and display, there may be some color differences, please refer to the actual item received.