Wolf Professional Dakota 2-200 INDUSTRIAL 14.1CFM 3HP 150psi Air Compressor 200L

The Wolf Air Dakota 2-200 Industrial Air Compressor is a dual cylinder, belt drive machine built for demanding industrial use, driven by a 3HP 230V single phase motor mounted on a 200 litre air receiver with extra wall thickness for added safety and long-term durability. It displaces 399 litres per minute (14.1 CFM) through its heavy-duty, in-line twin cast iron cylinder pump, operating at up to 10 BAR (150 psi), suited to applications like car body refinishing, engineering workshops, and general maintenance departments.

A compressed air aftercooler improves efficiency during use, while an air outlet pressure regulator and twin 1/4 inch BSP Uni Hi Flow quick release connectors give flexible, controlled air delivery to connected tools. This is a heavy, high-power unit requiring two people to unload from a delivery vehicle, and it draws significant start-up power. It runs reliably from a dedicated 13amp or 16amp supply, or a 13amp plug on a 32amp domestic ring main with no other significant load drawn at the same time; if a fuse blows, this typically indicates a voltage drop on start-up rather than a fault with the compressor, and switching to a dedicated supply usually resolves it. Never run this compressor from an extension cable, as this can cause operational issues and motor damage.

399 litres/min (14.1 CFM) output – delivers strong, consistent air supply for demanding industrial applications.
200 litre air receiver – built with extra wall thickness for added safety and long service life.
Dual cylinder cast iron pump – provides durable, reliable performance for regular heavy use.
10 BAR (150 psi) max pressure – suited to industrial tasks like refinishing and workshop maintenance.
Twin quick release outlets with regulator – enables controlled, flexible air delivery to multiple tools.