150 mm VMC ventilation grille – Stainless steel with anti-backflow and movable louvers – Automatic closing – Weatherproof – 184x184 mm

The hood's outer grille acts as an external ventilation grille, covering the ventilation ducts.

Supplied with wall plugs and screws for installation.

This non-return valve can be used universally on all common round ventilation ducts and flexible pipes up to DN150mm.

The stainless steel is weather-resistant and corrosion-resistant.

The 150 functional ventilation grille is installed on the outer wall of the exhaust system.

When the fan stops, the louvers close automatically, preventing the entry of cold air and the penetration of dirt, insects, and other objects.

Due to their ease of movement, the louvers open with very little pressure; this is why they are also called floating louvers.

Wide range of uses: Suitable for kitchen hoods, workshops, cellars, and tumble dryers.

A typical clicking sound should be heard when installed near living areas.

Perfect choice for both amateurs and professionals.

Easy to install using standard tools.

Insert the vent cover into the ventilation duct or pipe and secure it to the wall with the screws provided.

Install the clamping eyelets on the ventilation pipe for optimal retention.

Note: All data is measured manually. Please allow a 1-3 cm error due to differences in lighting and display. There may be color variations. Please refer to the actual item received.