Coilovers Kit for Fiat Grande Punto 199 Punto Evo Lowering Suspension Shock Kit
You may also like
Compare with similar items
Product information
Description
Notice: No Top Mount Included, Modification Required If You Use OE Top Mount
Application:
for Fiat Grande Punto 199 2005-2009
for Fiat Abarth Grande Punto 2007-2010
for Fiat Punto Evo 2009-2012
for Fiat Abarth Punto Evo 2010-2015
for Fiat Punto 2012-2018
for Fiat Punto Evo 2014-present
Specification:
Adjustable Height: Yes, lowering 0-25mm depending on the vehicle models
Damping : fix rate damping
Spring rate Front: 7 kg/mm (392 lbs/in)
Spring rate Rear: 6 kg/mm (336 lbs/in)
Front spring inner diameter: 64-73.5 mm
Rear spring inner diameter: 62-85 mm
Spring length Front: 151 mm
Spring length Rear: 182 mm
Helper spring rate Front: 1 kg/mm (56 lbs/in)
Helper spring length Front: 102 mm
Spring Preload advised: 7-10 mm
Top mounts: Front and rear OE top mounts required
Shock type: Twin tube
Package included
2x front coilovers
2x rear coilovers
2x C spanners
Feature:
1. Lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Notice:
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.
Features
- BrandMAXPEEDINGRODS
- Warranty2 year(s)
- Shock absorber installationFront wheel
- Shock absorber onlyYes
- MaterialMetal


















