Coilovers Kit for VW Caddy MK3 2K MK4 1.2TSi 1.4 16v 1.6 8v TDi Van 2004-2015

Important

The quantity of coilover kits is shown in the picture

Application:

for VW CADDY MK3 03/2004-05/2015 

for VW CADDY MK4 5/2015-2020 

fit both 50 & 55mm front struts

Some models may require modification

Not for Facelift 2010-2015

Specifications

Front Lowering 30-95 mm (depends on your vechicle)

Rear Not adjustable

Spring Rate Front: 3.5 kg/mm (196 lbs/in)

Spring length Front: 255 mm

Front spring inner diameter: 62-80 mm

Spring Preload advised: 7-10 mm

Top mounts: Front and rear OE top mounts required

Package included

2x Front coilovers
2x Rear shockaa absorbers
2x C spanners

As shown in the picture

Feature

1.  Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.