Front Coilovers Suspension for Audi A4 S4 Quattro B6 B7 (01-06)

maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Note: Front OE top mounts need to be modified ( drill bigger hole for shaft)

Application:

For Audi A4 B6

For Audi A4 B6 8E2 Saloon 2000-2004

For Audi A4 B6 8E5 Estate 2001-2004

For Audi A4 B6 8H7 Convertible 2002-2005

For Audi A4 B7

For Audi A4 B7 8EC Saloon 2004-2008

For Audi A4 B7 8ED Estate 2004-2008

For Audi A4 B7 8HE Convertible 2005-2009

for 1.6 / 2.0 / 3.0 / 1.8T / 1.9 TDI / 2.7 TDI / / 2.0 FSI / 2.0 TFSI

for quattro 1.8 T / 3.0 TDI / 2.0 TFSI / S4 / RS4

Specification:

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Damping : fixed damping
Top mounts: Front OE top mounts required
Camber adjustable: Not available
Spring rate Front: 6.5 kg/mm (364 lbs/in)
Front spring inner diameter: 70-71 mm
Spring length Front: 295 mm
Spring Preload advised: 7-10 mm
Shock Type: Twin tube

Package included
2x Front coil-overs
2x C spanners

Dimension
Package size : 73*26*19 cm
Weight: 15680 g

Feature

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.