Motorcycle Bearing Puller Tools, 9-23mm Universal Inner Bearing Puller Tools

Description

WORKING PRINCIPLE: First connect the 1/2" to 3/4" external thread tap, and then use the external pulling force of the tool to achieve efficient removal.

HIGH EFFICIENCY: Place the tool head into the inner bearing race and screw it into the shaft, open the fixture, bring it close to the bearing, and remove the inner shaft evenly without damaging other parts.

PERFECTLY COMPATIBLE: Inner bearing puller suitable for parts 9-23mm (0.35-0.91 inch) sleeve bearing pullers, such as motorcycle wheels, bicycle wheels, automobile flywheels, generator bearings, etc.

HARD AND DURABLE: High-quality Cr-V bearing pullers are heat-treated, have good wear resistance and are not easily deformed. The surface treated with oxidation resistance, rust-proof and durable.

COMPLETE PACK: A set of bearing pullers equipped with 5 sizes of open clips to meet the needs, 0.35 inch (9 mm), 0.43 inch (11 mm), 0.55 inch (14 mm), 0.74 inch (19 mm), 0.91 inch (23 mm).

How to use: 1. Choose a suitable puller (slightly smaller than the inner diameter); 2. Use the tip of the screw to turn clockwise, so that the puller opening remains open and hooks onto the inner diameter of the bearing (or the inner wall of the outer ring); Note: The puller opening must be open, otherwise the head may slip or be damaged.3. Fit the support sleeve (the inner wall of the sleeve must be larger than the outer diameter of the bearing outer ring). 4. After adjustment, insert a screwdriver (or open-end wrench) into the upper hole of the clamping screw, or use an adjustable wrench to screw in the nut underneath to remove the bearing.