Ronseal Quick Drying Exterior Woodstain - Antique Pine - Satin - 2.5L

Add a natural finish to your windows and doors while protecting them from rain, snow, frost and sunshine. Our Quick Drying Woodstain dries in 30 minutes and resists cracking and peeling too. It looks good and will protect your wood for longer.

Easy to apply, quick drying protection

Rainproof in only 30 minutes

Tough and durable to protect against the elements

Easy to apply

How to apply Quick Drying Woodstain

Before you start

Pick a warmish (above 10°c) dry day and make sure the wood is dry too.

Always wear a mask when sanding surfaces to prevent inhaling any dust.

How to prepare stained or unvarnished wood

1. Thoroughly sand the wood with 120 grit sandpaper to remove the old stain or varnish.
2. Use white spirit and a cloth to wipe down excess dust and clean the surface.

How to prepare new wood for staining

1. Lightly sand the wood to smooth out any lumps and bumps.
2. Wipe down the dust with white spirit and clean up any dirt and grime.

If you’re treating veneer, check the supplier’s guidelines before you prepare it.

Application

1. Thoroughly stir the woodstain to make sure all the colour pigments are mixed together.
2. Use a paintbrush to test the woodstain on a small hidden patch to check that you’re happy with the colour.
3. If you like the colour, start painting. Paint in the direction of the grain and, once you’ve finished your first coat, wait four hours before you apply the next coat. It will be rainproof in 30 minutes so don’t worry if the heavens open!
4. Before you apply the third and final coat, lightly sand the wood to help the stain stick and give a smoother finish.

After four hours, the woodstain will be completely dry.

If you get any stain on yourself, it can be easily washed off with warm, soapy water.

Aftercare

Cleaning

Once the woodstain is dry, you can look after your windows and doors as normal. Regularly clean them to remove dirt and grime and to show off your DIY skills.

Clean your brushes in warm, soapy water.

Repair

If you notice your hard work has signs of scratches or damage, don’t worry, you don’t need to strip it all back and start from square one.

Simply sand down the affected area and repeat the process until you’ve rectified the damage.

Technical Specification