Suspension Coilovers for Ford Fiesta mk7 2008-2016 1.2,1.4,1.6TDCi ST

maXpeedingrods'MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Coilover Suspension Kit for Ford Fiesta MK7 JA8 2008-2019

Application

for Ford Fiesta MK7 (Fiesta VI) JA8 2008-2019 (inc ST180 ST200)

1.0 Turbo EcoBoost, 1.2, 1.4, 1.4TD, 1.5, 1.6 ST, 1.6 Turbo EcoBoost, 1.6Ti, 1.6 TDCI

Specification:

Adjustable height: Front Lowering 30-75mm

Adjustable height: Rear Lowering 30-65mm

Spring Rate Front: 3 kg/mm (168 lbs/in)

Spring Rate Rear: 5 kg/mm (280 lbs/in)

Spring length Front: 227 mm

Spring length Rear: 260 mm

Front spring inner diameter: 62-83 mm

Rear spring inner diameter: 58-62 mm

Spring Preload advised: 7-10 mm

Damping: fixed damping

Top mounts:OE top mounts required 

Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners

Dimension
Package Size: 70*50*20 cm
Weight: 19600 g

Feature:

1. Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.