TPMS Learning System Tire Valve Activator For OPEL GM TPMS New Tool Car Tire Pressure Monitor Sensor

• ?CHECK CAR MODEL? Please check your car model if it is compatible with EL-50448 in the latest photos. The tire pressure monitoring sensor cannot be used for trucks. The TPMS tire pressure sensor on and after 2012 models can only be read with certain diagnostic tools.
• ?SIMPLE OPERATION STEP? EL-50448 tpms reset tool program all tires much easier in just 3 steps: step 1 - Enable lean mode; step 2 – Read the tire pressure sensor information; step 3 - Same method to read other tire pressure information;
• ?ABOUT LEARNING MODE? Make sure the vehicle is in TPMS learning mode and follow the service procedure. Hold the tool against the sidewall of the tire near the valve stem. Press the learn button while holding the tool against the sidewall of the tire.
• ?SIMPLE ACTIVATION? The Tire Pressure Monitoring Sensor Activation Tool is simple, quick and user-friendly and activates the individual TPM sensor with the press of a button.
• ?NOTES ON USE? Different vehicles may take different times to reset all tire sensors after a turn. The tire pressure monitoring sensor uses a NEW 9V battery. Charger and battery are not included. Remove the battery when not in use.

How to use:
1. Put the car into TPMS learning mode. (The car honks twice)
2. Start the relearn process from the left front tire and align the antenna in the correct position. Press and release the on/off switch. Once the speaker chirps, move on to the next tire.
3. Follow this order to install the TPMS sensors: front left, front right, rear right, rear left.
4. Once all sensors are reset, the car will beep twice to indicate that the TPMS has been relearned.
Warm Tips:
1. When using the EL50448, make sure the antenna is in the correct position.
2. Make sure the 9V battery is in good condition.
3. It works for light trucks, but not for heavy trucks.

LRFR is committed to providing each customer with the highest possible quality of customer service.