1/5
46/09 X 1/2 Tct 90 Shank Mounted Template Profiler 19.1 X 50Mm
Sold by Trade Hut Direct and 3 other sellers
You may also like
Compare with similar items
Product information
Description
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work.
For profiling and rebating applications only. NOT for plunge, cutting or grooving.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2 in Shank.
Angle A = 90°
D = 19.1 mm
C = 50 mm
Features
- BrandTREND
- Length50 mm
- MaterialTungsten carbide
- ColourYellow
- Warranty1 year(s)
Advice from
Wood router buying guide
The ultimate tool for anyone who likes to make a little sawdust, a router offers many possibilities. The basic principle? A motor mounted on a fixed base spins a bit at high speed. Bits come in different designs and cross-sections to give your project the most desirable shape; rabbet, chamfer, or straight edge.
'/%3E%3C/svg%3E)
You are here:
Related categories
Ochre curtains
Herringbone curtains
Curtains next
Patterned curtains
Deconovo curtains
Wide curtains
Linen curtains
Star curtains
Mesh curtains
Geometric curtains
Red curtains
Charcoal curtains
Unicorn curtains
Ring top curtains
Gaming curtains
Boho curtains
Trend C041A x 1/4 TCT Dovetail 104° 12.7 x 12.7mm TREC041A14TC
Trend Craft Dovetail Jig 300mm TRECDJ300
Trend 620/4WS Countersink TRE6204WS
Trend C020 X 1/4 Tungsten Carbide Two Flute 12.7mm
Trend Draining Groove Jig DG/JIG TREDRAINJIG
TREND 46/913X1/4 GUIDED PROFILER 12.7MM DIA
'/%3E%3C/svg%3E){kind=small}