1/5

Turbo T25 T28 GT25 GT28 GT2871 GT2860 universal A/R .64 Turbolader water cool

~~£277.00~~

£50Offered

To be applied on the payment page

Offer valid today only.

Sold by maXpeedingrods GB

Product information

Description

General description

This Turbo T25 T28 GT25 GT28 GT2871 GT2860 universal A/R .64 turbocharger is designed for universal application with a T25 flange, and can be converted to a T28 flange with an adapter. It is suitable for 1.5L-2.0L engines and can boost horsepower up to 350 BHP.

Technical specifications

Flange: Standard T25 Flange

Exhaust Outlet Flange: 5-Bolt

Turbine Trim: 76

Turbine A/R: 0.64

Turbine Inducer Diameter: 53.8mm

Turbine Exducer Diameter: 47mm

Compressor Trim: 48

Compressor A/R: 0.60

Compressor Inducer Diameter: 49.2mm

Compressor Exducer Diameter: 71mm

Bearing Type: Wet Float

Cooling Type: Water + Oil

Internal Wastegate: Yes

Oil Restrictor: Yes, size: inside diameter 2mm

Oil Feed Size: 12mm

Oil Feed Thread Size: M12*1.25

Oil Drain Size: 14mm

Oil Drain Thread Size: M8

Water Thread Size: M14*1.5

Warranty: 2 Years for any manufacturing defects

Installation

Replace oil supply lines and fittings to prevent oil flow restrictions.

Avoid using silicone or thread tape.

Ensure all openings to the turbo are clear and not plugged.

Shut off fuel or disable ignition and crank the engine for at least 15 seconds to raise oil pressure.

Allow the engine to fast idle (1,000 RPM) for 3-5 minutes to seat turbo seals.

Let the engine idle for 3-5 minutes before shutdown to ensure proper lubrication.

When changing oil, be sure to prime the oil filter.

Ensure the oil drain line is lower than the turbo itself.

Gasoline cars must install a water cooling device to avoid overheating.

Ensure exhaust outlets are well sealed by welding.

Professional installation is highly recommended.

Usage

This turbocharger is designed to increase power by 20-40% for your vehicle.

It is essential to analyze and eliminate the cause of any previous turbo failure before installation.

Other information

Product Material: Turbine housing made from ductile iron QT450-10, capable of withstanding high temperatures up to 700 degrees Celsius.

Steel turbine wheel made from K418 alloy for high oxidation resistance and stability at temperatures up to 900 degrees Celsius.

Compressor wheel/blades made from cast aluminum for good gas tightness and corrosion resistance.

Common causes of turbocharger failure include oil starvation, oil contamination, impact damage, and improper lubrication.

Symptoms of turbo failure may include black or blue exhaust smoke, excessive engine oil consumption, and unusual noises from the turbo.

Features

Brand
BFO
Length
26 cm
Width
25 cm
Height
24 cm
Material
Steel

Visit the BFO store

The journey of our automotive aftermarket brand began with a simple yet profound vision: to empower car enthusiasts and owners with top-notch car accessories at unbeatable prices. Our roots lie in a humble workshop, where our team of passionate engineers and craftsmen honed their skills to create high-quality parts, one by one. What sets us apart is our commitment to excellence. We believe that every car deserves the best, regardless of its make or model. That's why we built our own production facility, ensuring that every component we produce meets the highest standards of quality and durability. Our rigorous testing procedures and constant innovation ensure that our products not only look great but also perform flawlessly on the road. More than just a brand, we are a community of enthusiasts who share a common love for cars. We understand the thrill of customizing your ride, the pride of driving a unique vehicle, and the satisfaction of knowing that you've made a smart investment.

You are here: