Coilovers+ Drop end links for BMW 3 Series E92 Coupe 2005-2013 E90 E91 E93

Application:

for BMW 3 Series E90 Saloon RWD 2004-2011

316i,318i,320i,323i,325i,328i,330i,335i,316d,318d,320d,325d,330d,335d

for BMW 3 Series E91 Estate / Touring 2004-2012

316i,318i,320i,323i,325i,330i,335i,316d,318d,320d,325d,330d,335d 

for BMW 3 Series E92 Coupe 2005-2013

316i,318i,320i,323i,325i,328i,330i,335i,325d,330d,335d

for BMW 3 Series E93 Convertible / Cabriolet 2006-2013

318i,320i,323i,325i,330i,335i,325d,330d

Note: Does not fit:

not for M3 models

not for all-wheel

Specification

Height adjustable: Front & Rear

Front lowering 30-85mm (depends on vehicle models)

Rear lowering 30-65mm (depends on vehicle models)

Damping : fixed damping

Front Top mounts: pillow ball bearing camber plates

Rear top mounts: not include

Camber adjustable: only front

Spring rate Front: 8 kg/mm (448 lbs/in)

Spring rate Rear: 8 kg/mm (448 lbs/in)

Front spring inner diameter: 62 mm

Rear spring inner diameter: 64 mm

Spring length Front: 230 mm

Spring length Rear: 262 mm

Spring Preload advised: 7-10 mm

Shock type: twin tube

Package included

2x Front coil-overs
2x Rear coil-overs
2x C spanners
2x Swaybar end links

Feature

1. Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.