Coilovers For Honda Accord 2008-2015 Acura TSX CW CU Suspension Lowering Kit

Application

For Honda Acoord VIII Saloon CP2 / CP3 2008-2012

For Honda Accord VIII Coupe CS1 / CS2 2008-2012

For Honda Accord VIII Saloon CU1 2008-2013

For Honda Accord VIII Type-S Saloon CU2 2008-2013

For Honda Accord Tourer Wagon CW1 / CW2 / CW3  2008-2013

For Honda Euro Sedan CU1 / CU2 2008-2015

For Acura TSX Saloon CU2 2009-2014, excluding Special Edition

For Acura TSX Sport Wagon  2011-2013

Note: for Accord trim levels EX,EX-L,LX-S, and for Acura TSX Sedan & Sport Wagon have strut tower bar mounting points.
for Accord trim levels LX, SE, and LX-P have reserved factory mounting points.

Specifications

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models

Damping adjustable: Available, 24 levels of rebound damping force

Top mounts: Front and rear standard rubber top mounts

Camber adjustable: Not available

Spring Rate Front: 10 kg/mm (560 lbs/in)

Spring Rate Rear: 7 kg/mm (392 lbs/in)

Front spring inner diameter: 70.5 mm

Rear spring inner diameter: 70.5 mm

Spring length Front: 200 mm

Spring length Rear: 200 mm

Spring Preload advised: 7-10 mm

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance 
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable preload spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. (for some models)
5. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring---  600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.