Coilovers Suspension for Audi A5 S5 B8 2007-17 2.0 TFSi 3.0 TDI Quattro 8T3 8TA

Application:

for Audi A5 (8T/8F) 2007-2017

(8T3/8F7/8TA)

Specification:

Height adjustable: Front & Rear (depends on your vehicle)

Front Lowering: 30-75mm 

Rear Lowering: 20-65mm

Damping : fixed damping

Top mount: not included
Spring rate Front: 5 kg/mm (280 lbs/in)
Spring rate Rear: 3 kg/mm (168 lbs/in)
Front spring inner diameter: 62-70 mm
Rear spring inner diameter: 62-53 mm
Spring length Front: 255 mm
Spring length Rear: 255 mm
Spring Preload advised: 7-10 mm
Damping rod diameter Front: Φ 20 mm
Damping rod diameter Rear: Φ12.5 mm

Twin -tube Diameter Front: 52 mm
Twin -tube Diameter Rear: 40 mm
Damping  thread Front:  M52×1.5 mm
Rod End Thread Front: M12×1.25 mm
Rod End Thread Rear: M10×1.25 mm

Front Collapsed Length: 330 mm / 12.99"
Front Extended Length: 495 mm / 19.49"
Rear Collapsed Length: 421 mm / 16.57"
Rear Extended Length: 630 mm / 24.8"
 

Package included:

2x Front coil-overs
2x Rear coil-overs
2x C spanners
2x Lower mount washers

Package size : 70*53*20 cm
Weight: 24900 g

Feature:

1. Lower height adjustable (depends on vehicle models)

2. Dust boot, solid rubber bump stops

3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets

4. Simple install, Easy to adjust.

5. Use the vehicle's original upper mounts (not included in our product kit).

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.

3. Impact wrench is prohibited during the installation, it will loosen or damage the product.

4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)

5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.