Coilovers Suspension Kit for Citroen C2 JM C3 FC FN 2003-2010
Buying for your business?
Negotiated prices excl. VAT up to -20%
You may also like
Compare with similar items
Product information
Description
maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.
Application:
For Citroen C2 FWD type J 2003-2010
For Citroen C3 FWD type F, 2002-2010
For Citroen C3 FWD Pluriel type H, 2003-2010
Specification
Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Damping : Fixed damping
Top mounts: Front and rear OE top mounts required
Spring rate Front: 5 kg/mm (280 lbs/in)
Spring rate Rear: 2.5 kg/mm (140 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 57-61 mm
Spring length Front: 160 mm
Spring length Rear: 230 mm
Helper spring rate Front: 1 kg/mm (56 lbs/in)
Helper spring length Front: 102 mm
Spring Preload advised: 7-10 mm
Shock Type: Twin tube
Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Feature
1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note:
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.
Features
- BrandMAXPEEDINGRODS
- Shock Absorber TechnologyTwin-tube gas
- ManoMano ReferenceME237123454
- MMID400763279378
- Product codeLU5BDW
- EAN6941538322872



















