Damper Adjust Coilovers Suspension Kit for Subaru Impreza WRX GC8 GC7 GC6 GC5

maXpeedingrods-B3 is based on B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

Applications

For Subaru Impreza incl. WRX GC, GF, GFC 1992.11-2000.08

fit for chassis code: GC5,GC6,GC7,GC8/GF5,GF6,GF8

Notice: The coilovers kit will "Lower your car" and does not keep to the original ride height.

Specifications

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models

Damping: 24 levels of rebound damping force

Front and rear top mounts: Pillow ball

Camber adjustable: Front Only

Spring Rate Front: 10 kg/mm (560 lbs/in)

Spring Rate Rear: 6 kg/mm (336 lbs/in)

Front spring inner diameter: 70.5 mm

Rear spring inner diameter: 70.5 mm

Spring length Front: 180 mm

Spring length Rear: 180 mm

Spring Preload advised: 7-10 mm
 

Package included

2x Front coil-overs
2x Rear coil-overs
2x C spanners
1x Allen wrench

Dimension

Package Size: 64*50*20 cm
Weight: 27650 g

Feature

* Lowered height adjustment from 25-75mm which allow lower center of gravity and also add a more aggressive stance.
* A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
* Twin-Tube structure allows sufficient stroke within the shock absorber.
* Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.
* Separate height adjustment does not affect damper stroke.
* Height can be adjusted with coilovers installed on the vehicle.
* High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.
* Height Adjustment tools included.
* Camber plate top mounts help to eliminate the need for a separate camber kit.
* Pillow ball top mount - It improves the steering feel and response.
* Most pieces in our coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components.

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.