Front Rear Coilovers for Peugeot 206+ 2009-2013 Suspension lowering Springs

maXpeedingrods B1 Coilovers is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Application:

for Peugeot 206 Hatchback (2A/C) 08/1998-12/2012

for Peugeot 206 CC (2D) 09/2000-12/2007

for Peugeot 206 Saloon 03/2007-12/2008

for Peugeot 206 Sports Wagon (2E/K) 07/2002-12/2008

for Peugeot 206+ (2L, 2M) 2009/01-2013/06

Specification:

Front Lowering: 35-75mm depends on your vehicle

Rear Lowering: Adjusted through torsion bar

Front top mounts: OE top mounts required

Spring rate Front: 6 kg/mm (336 lbs/in)

Front spring inner diameter: 62 mm

Spring length Front: 180 mm

Helper spring rate Front: 1 kg/mm (56 lbs/in)

Helper spring length Front: 102 mm

Spring Preload advised: 7-10 mm

Package included:

2x Front coil-overs

2x Rear coil-overs

2x C spanners

Feature:

1. Lower height adjustable (depends on vehicle models)

2. Dust boot, solid rubber bump stops

3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets

4. Simple install, Easy to adjust.

5. Use the vehicle's original upper mounts (not included in our product kit).

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.

3. Impact wrench is prohibited during the installation, it will loosen or damage the product.

4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)

5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.