1/5

4 in 1 Wall Detector Wall Metal Detector with LCD Display Stud Finder, Detector with 9V Battery for Detecting Metals, Electrical Wires, Wood Studs in Walls, Floors and Ceilings

~~£36.11~~

Of which environmental contribution £0.10 including VAT.

Sold by A10 ROOFING (LONDON) LIMITED

Product information

Description

General description

The 4 in 1 Wall Detector is a versatile tool designed for detecting metals, wood, magnetism, and AC wires in walls, floors, and ceilings. It features a large LCD display that provides real-time information on detection mode, depth, signal strength, and battery level. This detector is ideal for both professionals and DIY enthusiasts, ensuring accurate and efficient positioning of nails, screws, rebar, and wooden beams.

Technical specifications

Detection modes: Metal, Wood, Magnetism, AC wires

Maximum detection depth for wood and metal studs: 19mm

Deep scanning maximum depth: 38mm

Maximum metal detection depth: 60mm

Maximum electrical wire detection depth: 51mm

Power supply: 9V battery

Installation

Pre-scan calibration: Select a mode and press the scan button to calibrate the tool.

Calibration confirmation: Wait for the reduction lever to disappear and a beep to confirm calibration.

Recalibration: If the scanner is shaken or lifted, recalibrate the device before use.

Usage

Scan the wall: Once the stud finder detects material, the LCD screen will indicate the direction.

Find the stud location: When the signal bar is full and the alarm sounds the loudest, the center of the object has been found.

Mark the location: Use a pencil to mark the detected position.

Other information

Waterproof and durable design allows for use in various weather conditions.

LCD display with backlight for easy visibility.

Includes an AC warning function.

Features

Brand
CYSLMUK
Length
17.2 cm
Width
7.6 cm
Weight
250 g
Material
Wood

Advice from

Wall chaser buying guide

When installing cables or pipes, it's often necessary to cut slots into the wall – and that's where wall chasers come in. Designed to cut chases into concrete, wood or plaster, these tools can even be connected to a vacuum cleaner to keep your workspace free of dust. Looking for a wall chaser? Let's cut to the 'chase'!

Read our guide

You are here: