Ronseal uPVC Window and Door Paint in Sage Satin - 750ml

Description

• This uPVC paint revamps and refreshes uPVC windows and doors with a long-lasting, durable finish. It is flexible to prevent cracking, mold resistant to minimize staining, and ready to withstand various weather conditions. The paint can be applied directly to the surface without a primer and dries quickly, becoming rainproof in just 1 hour.

Specifications

• Usage: Suitable for bare or previously painted uPVC doors, windows, and trims
• Coverage: Approximately 6.5m² per litre
• Dry time: Rainproof in 1 hour
• Recoat time: 4 hours
• Number of coats: 2 coats recommended
• Finish: Satin
• Durability: Up to 10 years of protection
• Application methods: Brush, roller, or sprayer
• Paint base: Water-based
• Available sizes: 750ml and 2.5L
• VOC: Low

Compatibility and Accessories

• Compatible with uPVC surfaces such as windows, doors, and trims
• Suitable for use with brushes, rollers, or sprayers for application

Installation

• Ensure the surface is clean, dry, and free from dirt, dust, and grease before painting
• Lightly sand the surface with 180-220 grit sandpaper for a smooth finish; if repainting over existing paint in good condition, use 240 grit; for flaking or cracked paint, use 120 grit
• Wait at least 12 months after installing new uPVC before painting
• Stir the paint thoroughly before use
• Apply with a brush, roller, or sprayer in even coats, leaving 2-4 hours between coats
• Allow the final coat to dry for at least 1 hour before exposure to rain or moisture

Usage

• Apply on clean, dry, and smooth surfaces
• For best results, apply two coats; a third coat may be necessary over dark colors
• Ensure good ventilation during application and drying

Other Information

• To maintain the finish, inspect annually for cracks, blisters, or scratches and touch up as needed
• Clean brushes and rollers with warm soapy water after use
• Dispose of leftover paint responsibly, following local regulations