STREET COILOVERS For NISSAN 350Z Z33 2002-2006 Fairlady Z SUSPENSION KITS

maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Application

For Infiniti G35 Coupe 2003-2007 (RWD Only)

For Nissan 350Z (Fairlady Z Z33) Roadster 2002-2009

Don't fit for Infiniti G35 X Sedan

Specifications

Height adjustable: lowering 0-25mm depending on the vehicle models

Top mounts: Front and rear OE top mounts required 

Damping : fixed damping

Spring rate Front: 8 kg/mm (448 lbs/in)

Spring rate Rear: 5 kg/mm (280 lbs/in)

Front spring inner diameter: 64-89 mm

Rear spring inner diameter: 66-104 mm

Spring length Front: 242 mm

Spring length Rear: 275 mm

Spring Preload advised: 7-10 mm

Shock type: Twin tube

Package included

2x Front coil-overs
2x Rear coil-overs
2x C spanners

Package size : 70*50*20 cm
Weight: 20000 g

Features:

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.