T7 Coilovers Kit for BMW E46 3 Series Saloon Coupe Touring Convertible 1997-2005

maXpeedingrods T7 coilovers are designed for daily street use and Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, and an adjustable camber plate( applicable for some vehicles), which offers you a lowered stance and enhanced handling.

Applications:

For BMW 3 E46 Saloon 1997-2005

  316i 318i 320i 323i 325i 328i 330i 318d 320d 330d

For BMW 3 E46 Convertible 2000-2007

  318Ci 320Ci 323Ci 325Ci 330Ci 320Cd 330Cd

For BMW 3 E46 Coupe 1998-2006

  316Ci 318Ci 320Ci 323Ci 325Ci 328Ci 330Ci 320Cd 330Cd

For BMW 3 E46 Touring / Estate 1999-2005

  316i 318i 320i 323i 325i 328i 330i 330d 318d 320d

Note:

not for Xi/xd 4 wheel drive

not for M3 model either

Specifications:

Height adjustable: lowering 25-75mm(depending on vehicle models)

Damping: 24 levels rebound damping adjustable

Front top mounts: pillow ball bearing camber plate

Rear top mounts: pillow ball top mounts

Spring rate Front: 9 kg/mm (504 lbs/in)

Spring rate Rear: 11 kg/mm (616 lbs/in)

Spring length Front: 180mm

Spring length Rear: 183mm

Shock type: Twin tube

Spring Preload: 7-10 mm
 

Package included

2x front coil-overs
2x rear coil-overs
2x C spanners
1x sticker

Feature:

1)Professional racing technology for junior track use and daily street use, providing better performance and enhanced handling.
2)Lowered height adjustment from 25-75mm(depending on vehicle models) which adds a more aggressive stance and a lower center of gravity.
3)Adjustable pre-load spring tension reduces shaking motion.
4)A 24-level adjustable damper allows you to dial in your coil-overs system perfectly.
5)CNC machined aluminum top mounts and lockers have excellent strength and save weight.
6)Highly durable and reliable heavy-duty steel lower mounts.
7)All inserts come with fitted long rubber boots to protect the damper and be durable.
8) Twin-tube structure provides excellent handling & control characteristics for most driving conditions.
9)Corrosion finish anodized aluminum and powder-coated carbon steel parts with a matt-finished surface.
10)Every part was tested on our professional machine before being assembled and tested by our professional racers on the road.
11)Clean room assembled maintains a higher level of accuracy and reliability.

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.