Adjustable Height Coilovers Kit For Nissan 200SX 240SX S14 Silvia 1995-1998

Application:

for Nissan S14 Silvia 1994-1998

for Nissan S14 200SX Base Model / LE 1994-1998

for Nissan S14 240SX Base Model / LE/SE 1995-1998 

Note: Don't fit Nissan 200SX SE /SE-R

Specification:

Adjustable height: lowering 1-3 inch

Damping:No adjustable damper force

Top mounts: Front pillow ball with camber plate, Rear standard rubber 

Spring rate Front: 8 kg/mm (448 lbs/in)

Spring rate Rear: 6 kg/mm (336 lbs/in)

Spring length Front: 180mm

Spring length Rear: 255mm

Coilover Overall Length Front: 420mm-470mm

Coilover Overall Length Rear: 550mm-700mm

Shock Type: Twin tube.

Spring Preload: 7-10 mm.
 

Features:

1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.
2.Camber plate top mounts help to eliminate the need for a separate camber kit.（Only Front)
3.Pillow ball top mount - It improves the steering feel and response.（Only Front )
4. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (Only Rear)
5. Twin-Tube structure allows sufficient stroke within the shock absorber.
6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.
7. Separate height adjustment does not affect damper stroke.
8. Height can be adjusted with coilovers installed on the vehicle.
9. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.
10. Height Adjustment tools included. 
11. Full rebuildable.

Introduction

maXpeedingrods B2 coilovers are designed as an entry level for street use. It features with full length height adjustable and adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, improved performance  for your daily use vehicle.