4-inch DC12V 235CFM Inline Bilge Air Blower, High Airflow Marine Electric Inline Blower for RVs, Boats, and Yachts

Features:1.High Performance: The blower fan is designed for high efficiency and high-performance operation. The front and rear shaft seals and corrosion-resistant motor housings ensure a long service life.
2.Wide Application: Can be installed on any flat surface and provides higher airflow, lower amp consumption, and quieter operation than standard fans.
3.Five Blades: The RV ventilation fan is designed with a five-blade design to maximize airflow and efficiency. The motor shaft is sealed for moisture protection.
4. Specifications: Airflow is 235 CFM, operating voltage is 12V DC, fuse is 7A, size is 4 inches, can be installed in the bilge, engine room, aisle, and canopy.
5.Fine Workmanship: Fine workmanship, beautiful appearance, compact and portable, giving you excellent using experience.

Specifications:

Item Type: Air Blower
Material: ABS Shell, Copper Motor Core
Air Flow: 235 CFM
Working Voltage: DC12V
Fuse: 7 A
Current: 4 amps
Size: approx. 4 inch/102 mm
Mounting: suitable for motorhomes, boats, yachts, ideal for slipways, engine rooms, driveways and awnings
Installation:
1. Install the fan with two M6 screws in the upper part of the bilge, electrical room, galley and toilet. When fixing the screws, they should not be overtightened to avoid penetration through the chassis.
2. The fan should be moderately inclined when installed, which is practical to avoid rain erosion.The direction of the arrow is the exhaust port (the correct airflow direction should be confirmed before installation).
3. Secure the diameter (235CFM-4 inch) inlet and outlet conduit with a stainless steel pipe loop.
4. The intake duct must be installed and permanently attached above the bilge plane and properly located under the engine.
Connection:
1. Brown is positive electrode, black is negative electrode, use crimp contact gasket. The seal uses a sealant to resist water.
2. The positive electrode must be connected to the fuse
3. The positive pole must be connected to a disconnector or connection switch of the same power as the fuse.
4. The minimum wire diameter is 16 AWG.

Package List:

1 x Inline Blower

1 x Manual