Coilovers Kit for VW Golf Mk7 5G BA5 1.0 1.2 1.4 TSI Sportsvan Audi A3 8V S3

maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Application:

For Multi-Link Rear suspension

For VW

For VW Golf Mk7 (2012-2020) 1.0 1.2 1.4 TSI 

For Audi

For Audi A3 8V (2012-2020)

For Audi S3 8V (2012-2020)  

For Audi TT TTS FV3 (2014-2025) 1.8 2.0 TFSI Coupe Roadster

For Seat

For Seat Leon Mk3 5F (2012-2020)  

For Skoda

For Skoda Superb Mk3 3V (2015-2020) 1.4TSI 1.8TSI 1.6TDI

For Skoda Octavia Mk3 5E (2012-2020) for 2.0 TSI TDI

Specification

Front Lowering: 30-65mm depending on the vehicle models

Rear Lowering: 30-60mm depending on the vehicle models

Damping : fixed damping

Spring Rate Front: 5 kg/mm (280 lbs/in)

Spring Rate Rear: 5 kg/mm (280 lbs/in)

Front spring inner diameter: 70.5-90 mm

Rear spring inner diameter: 57-62 mm

Spring length Front: 262 mm

Spring length Rear: 260 mm

Spring Preload advised: 7-10 mm

Shock Type: Twin tube

Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners

Dimension
Package Size: 70*51*20 cm
Weight: 24550 g

Feature
1. Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.