Ronseal Quick Drying Exterior Satin Woodstain in Dark Oak - 250ml

Description

• This quick-drying woodstain provides a natural semi-transparent satin finish while protecting wood surfaces from weather elements. It is suitable for exterior use on doors, window frames, cladding, garden furniture, and other smooth planed timber. The stain is highly water-repellent, resists cracking and peeling, and offers UV protection to prevent sun damage. It can be applied to both bare and previously stained wood, ensuring long-lasting protection and enhanced appearance.

Technical Specifications

• Usage: Exterior doors, windows, cladding, garden furniture
• Coverage: Up to 20 m² per litre
• Drying time: Rainproof in 30 minutes, fully dry in approximately 4 hours
• Number of coats: 3
• Finish: Satin or gloss (depending on product variant)
• Application: Brush
• Base: Water-based
• Sizes available: 0.25L, 0.75L, 2.5L
• VOC: Low

Compatibility and Accessories

• Suitable for bare or previously stained wood surfaces
• Can be used on various types of smooth, planed timber

Installation

• Ensure the wood surface is clean, dry, and free of dust or grease before application.
• Stir the stain thoroughly before use.
• Apply with a brush, following the direction of the wood grain.
• Apply three coats for optimal protection and finish, allowing four hours between coats.
• Lightly sand the surface before the final coat to improve adhesion and finish smoothness.

Usage

• Apply to clean, dry wood surfaces, either new or previously stained.
• Use a brush to evenly coat the surface, following the grain.
• Allow each coat to dry for approximately four hours before applying the next.
• Rainproof in just 30 minutes, so outdoor application is possible even in light rain.

Other Information

• Clean brushes and tools with warm, soapy water after use.
• For touch-ups or repairs, lightly sand affected areas and reapply the stain as needed.