Universal fan with non-return valve, Ø 100mm/10cm, for bathroom and kitchen, low energy consumption 8W, quiet operation 26dB and high efficiency 93 m³/h. System Energy

Standard 100 mm exhaust fan with non-return valve for bathrooms and kitchens. Low energy consumption, quiet operation.

Technical Specifications

: Diameter: 100 mm; Capacity: 93 m³/h; Sound pressure level: 26 dB(A).

Electrical current: 220-230 V, 50-60 Hz;

Power: 8 W; Protection rating: IP-X2; Switching: Standard (with wired network).

Safe to use.

Lightweight, easy, and quick to install.

Superior quality at a better price.

Energy is a simple way to ensure good air quality in your bathroom.

The quiet bathroom fan from the Energy 100S series is primarily a classic model offering an airflow of approximately 90m³/h with a low power consumption of 8W.

This is a well-known and proven solution that works best for wall mounting.

Ceiling mounting is not recommended for this model. A simple and quiet solution. The front grille allows air to circulate freely, making it even more effective at removing moisture and odors from the bathroom or any other room where it is installed.

The extractor fan in our range features a very simple electrical connection system.

It can run continuously or be activated by a switch at the same time as the lighting, for example.

How to easily connect a fan to electricity Step 1 Remove the front part of the fan Step 2 Route the electrical cable.

Connect the wires to the cube.

Step 3 Reinstall the front section.

Done Fan Installation Options The Energy series wall fan is also a good solution for additional ventilation in rooms such as: - the kitchen - the pantry - small storage room - the closet Thanks to the non-return valve, the Energy extractor fan does not that it removes air while preventing outside air from entering.

If you are looking for a simple way to get better air quality by getting rid of humidity, the Energy is a good solution.