General description
The Universal Wireless Remote Control Switch operates at a frequency of 433 MHz and is designed for DC 12V applications. It features a reliable RF relay receiver module that allows for remote control of connected devices from a distance of up to 50 meters in open areas. The system is equipped with an EV1527 learning code chip, ensuring secure operation and preventing unauthorized access.
Technical specifications
- Operating voltage: DC 12V
- Input voltage/output: 1 ~ 250V
- Maximum current: 10A
- RF frequency: 433 MHz
- Support encoding: learning code EV1527
- Sensitivity reception: > 97 dBm
- RF operation mode: ASK superhetodyne wireless reception
- Operating temperature: -30 ~ +80 °C
- Reception range: more than 50 meters in open space
- Standing current: < 5 mA
Compatibility and accessories
This receiver can store up to 20 transmitters, allowing multiple users to control the same device. One transmitter can also control multiple receivers, providing flexibility in usage.
Installation
To install the remote control switch:
- Press the learning button on the receiver once and wait for 3 seconds.
- Press a button on the remote control to complete the configuration.
Usage
The remote control switch features four operating modes:
- Momentary mode: Press and hold the button to turn on the relay; release to turn it off.
- Toggle mode: Press the button to turn on the relay; press again to turn it off.
- Latched mode: Press the "ON" button to turn on the relay; press the "OFF" button to turn it off.
- Delay mode: Press and hold the button to turn on the relay; it will turn off automatically after a set time (5, 10, 15, or 20 seconds).
Other information




















