Owatrol CIP Primer for Extreme Conditions - 750ml

Name: Owatrol CIP Primer for Extreme Conditions - 750ml
Brand: OWATROL
SKU: 786
Price: 38.02 GBP
Availability: InStock
Rating: 4.69 (42 reviews)

~~£54.28~~

Colour: Red

Red

Brown

Sold by diy direct

Product information

Description

General description

CIP (Corrosive Inhibiting Primer) is a rust-inhibiting primer designed for extreme conditions. It features anti-corrosive properties that stabilize surfaces by penetrating deep into the substrate, driving out excess moisture and air to form a solid, stable layer. CIP is suitable for both new and rusted surfaces, can be applied on horizontal and vertical surfaces, and is compatible with single and 2-pack paints and finishes. Its brick-red pigmentation enhances protection and film-forming qualities, making it ideal for use in marine environments and tropical areas.

Technical specifications

Volume: 750ml

Application tools: Brush, Roller, Airless Sprayer (0.4 mm x 80˚ @ 1860-2000psi (128-138 bars))

Application temperature: Between 5˚C and 35˚C

Installation

Surfaces must be clean, dry, and free from oil, grease, and other contaminants.

Remove all mill scale, loose and flaking rust, and old paint back to a sound surface.

Wash surfaces exposed to chemicals with copious amounts of water or steam clean.

For severely contaminated surfaces, use an appropriate solvent for cleaning.

Usage

Stir well before and during use; do not thin.

For new surfaces: Apply 1 coat of Owatrol CIP and allow to dry. For aggressive conditions, apply 2 priming coats.

For clean, lightly rusted or new unpainted rusty steel: Apply 2 coats of Owatrol CIP, allowing drying time between coats.

For old or severely rusted surfaces: Apply 3 coats of Owatrol CIP or use wet on wet applications of Owatrol Oil until rust is saturated, then apply 2 coats of Owatrol CIP.

For previously coated surfaces: Spot prime exposed metal with 2 coats of Owatrol CIP, then apply a 3rd coat over the entire area.

Clean tools and equipment with white spirit while still wet; if dried, remove with paint stripper.

Other information

Note: Rags, steel wool, etc., soaked in CIP may spontaneously catch fire if improperly discarded. Saturate them with water after use or place in a sealed, water-filled metal container before disposal.

Cover areas not intended for painting.

Do not apply in direct sunlight or on hot surfaces.

Features

Brand
OWATROL
Colour
Red
NF certification
NF412
Warranty
2 year(s)
Origin
Made in France
Pcs per pack
1
Intended use
Outdoor
Colour family
Red & Pink
Suitable for
Metal
Resin material
Acrylic
Material
Metal
Weight
1000 g
Application surface
Metal
anti-corrosion treatment
Yes
Type of packaging
Jerry can
Primary type
Undercoat and repair material
ManoMano Reference
ME11329183
MMID
341690946230
Product code
786
EAN
3285820056353

Customer reviews

4,7

/ 42 Reviews

Reviews verified by ManoMano

CCHARLES

Published on 03/03/2022, France

Very fast delivery time. The paint I've been using it for 10 years. More precisely, the owatrol cip marine primer. I'm satisfied with it

OOLIVIER

Published on 10/01/2022, France

Nice covering of the few slightly rusty wheel arches. The paint holds up well. To be seen over time but apparently it's the best.

1 person found this helpful

MManoMano Customer

Published on 17/03/2021, France

Excellent product, which I have known and used for a long time and with which I am very satisfied.

1 person found this helpful

MManoMano Customer

Published on 03/08/2020, France

Excellent product, easy to apply! I used it as a primary on an engine block

MManoMano Customer

Published on 24/10/2022, France

Excellent product both for the anti-corrosion protection of a metal and for the adhesion of epoxy paints and sealants

1 person found this helpful

CCHRISTIAN

Published on 29/05/2020, France

The product is of good quality. On the other hand, the paint pot arrived dented and leaked a little in the package.

Advice from

Paint, primer and undercoat buying guide

Need a fresh lick of paint, but worried about damaged, porous or damp walls? To ensure you get a beautiful finish, there's only on thing for it: an undercoat! Etching primer, plasterboard or specialized wet-wall underlay: the "prime" solution for a good finish and an affordable result!

Read our guide

Visit the OWATROL store

Our local technical service will be happy to answer any questions you may have. 100% of our products are designed and manufactured in France at our two sites in Nord and Essonne.

You are here:

Owatrol CIP Primer for Extreme Conditions - 750ml

You may also like

Compare with similar items

Product information

Description

General description

Technical specifications

Installation

Usage

Other information

Features

Customer reviews

Paint, primer and undercoat buying guide

Related categories